Information on Obstruction Lighting beacons, strobes and controllers from RVA Lighting and Masts.

Please note: We are updating our content - information on this page is up to date, but spec. sheets may not be updated or may not be available. This is very temporary! Please check back soon or call or email if you require further assistance.

L864

L-864 LED Based Red Medium Intensity Beacon

The Dialight D564 Series LED based medium intensity red beacon utilizes state-of-the-art optical design to achieve the most compact, efficient, TC and FAA compliant L864 device in the market. While it readily interfaces into existing installations, its robust, low power design will provide years of maintenance-free service.  Available in both AC and DC versions.

For Spec. sheet, click here: LED Based L-864 Red Medium Intensity Beacon Brochure

Red/White Strobe

L865/L864 LED Based Dual White/Red MI Strobe

The all LED Dialight D1RW Series Medium Intensity White Strobe and Red Beacon is designed for the lighting of communication towers, smoke stacks, wind generators and other obstructions to aerial navigation, as specified by TC and FAA. The Dual L864/L865 beacon uses LED technology for light output from both the Red Beacon and White Strobe.

For spec sheet click here: L864 / L865 Dual Red / White LED Beacon Brochure

White/Red + IR Strobe

L865/L864 LED Based Dual White/Red +IR MI Strobe

The Dialight D1RW Catenary White Strobe and Red Beacon is designed to be incorporated into medium intensity L-866 and flashing red obstruction L-885 systems. Applications include the lighting of structures supporting overhead cables above canyons, valleys and waterways as specified by TC and FAA. The Dual L-866/L-885 uses LED technology for light output for both the Red Beacon and White Strobe.

For spec sheet click here: IR_Dual White/Red IR Strobe

Red/White Catenary MI Strobe

L865 LED Based White/White MI Strobe

The all LED Dialight D165 Series Medium Intensity White/White Strobe is designed for the lighting of communication towers, smoke stacks wind generators and other obstructions to aerial navigation, as specified by TC and FAA. The L865 Strobe uses LED technology for light output for the White Strobe.

For spec sheet click here: L865 White/White Strobe

L866 LED Based White Strobe

L866/L885 LED Based White/Red Catenary MI Strobe

The Dialight D1RW Catenary White Strobe and Red Beacon is designed to be incorporated into medium intensity L-866 and flashing red obstruction L-885 systems. Applications include the lighting of structures supporting overhead cables above canyons, valleys and waterways as specified by TC and FAA. The Dual L-866/L-885 uses LED technology for light output for both the Red Beacon and White Strobe.

For spec sheet click here: White/Red Catenary Strobe Spec Sheet

L866 LED Based White/White Catenary MI Strobe

The Dialight D1RW Catenary White/White Strobe is designed to be incorporated into medium intensity L-866. Applications include the lighting of structures supporting overhead cables above canyons, valleys and waterways as specified by TC and FAA. The L-866 uses LED technology for light output for the White Strobe.

For spec sheet click here: L866 White/White Strobe Spec. Sheet

White Strobe

L-856 LED Based High Intensity White/Red Strobe

The Dialight D266 High Intensity LED White/Red Strobe is an all LED L-856/L-864 unit designed for the lighting of communication towers, smoke stacks, broadcast towers and other tall obstructions to aerial navigation, as specified by the TC and FAA. A High Intensity system consists of 3 flash heads, 3 power supplies per level and 1 controller for the entire system.
The flash heads will be placed on up to six levels of the structure for a maximum of 18 synchronized flash heads for a single tower.

For spec sheet click here: L-856 High Intensity White/Red Strobe datasheet

L856 Strobe

L-856 LED Based High Intensity White/White Strobe

The Dialight D266 High Intensity LED White/White Strobe is an all LED L-856 unit designed for the lighting of communication towers, smoke stacks, broadcast towers and other tall obstructions to aerial navigation, as specified by the TC and FAA. A High Intensity system consists of 3 flash heads, 3 power supplies per level and 1 controller for the entire system. The flash heads will be placed on up to six levels of the structure for a maximum of 18 synchronized flash heads for a single tower. 

For spec sheet click here: L856 White/White Strobe Spec Sheet

Obstruction Lights

L-810 Red LED Obstruction Lights

The Dialight RTO Red Standard Series obstruction light utilizes a unique optical, electrical and mechanical design. The RTO series is the most universal, compact and efficient obstruction light in the world. ETL Certified to the FAA requirements, the RTO series fixture is also ICAO and Transport Canada compliant. Also available as a single fixture for direct replacement of incandescent lamp/lens technology. Available in both AC and DC.

For spec sheet click here: LED Based Obstruction Lights Brochure

Infrared Obstruction Light

L-810 Infrared (IR) LED Obstruction Lights

The Dialight RTO Red Infrared (IR) obstruction light incorporates Infrared LEDs to make the lights more clearly visible to aircraft pilots that utilize Night Vision Goggles during flight. Night Vision Goggles are commonly equipped with filters that are not sensitive to normal LED light. The use of Infrared LEDs in these RTOs along with standard Red LEDs allow for these obstruction lights to be seen clearly with or without Night Vision Goggles.

For spec sheet click here: L-810 Infrared (IR) obstruction lights Datasheet

Red LED Obstruction Lighting

L-810 Red LED Obstruction Lights

The Dialight 860 series red steady burn obstruction light was the first L-810 LED device to be certified by ETL to the rigorous TC and FAA standards. It is available in a range of voltages from 12 volts to 230 volts and in single or dual configurations.

For spec sheet click here: LED Based Obstruction Lights Brochure

Lighting Controller Red LED Lighting Controller Type A0 (20' - 150')

The LC-A0-LED Obstruction Light Controller is designed to work with L-810 LED Obstruction Lights. The controller is capable of controlling and monitoring up to five LED obstruction lights.

For spec sheet click here: RLC-200-UNI.pdf

Controller

Red LED Lighting Controller Type A1 (151' - 350')

The LC-A1-LED Obstruction Light Controller is designed to work with Dialight LED Beacons and Obstruction Lights. The controller is capable of controlling and monitoring up to two LED L-864 Beacons and five LED L-810 obstruction lights.

For spec sheet click here: RLC-201-UNI.pdf

 Lighting Controller

Red LED Lighting Controller Type A2 (351' - 500')

The LC-A2 LED Obstruction Light Controller is designed to work with Dialight LED Beacons and Obstruction Lights. The controller is capable of controlling and monitoring three LED L-864 beacons and two levels of five LED L-810 obstruction lights.

For spec sheet click here: RLC-203-UNI.pdf

 Lighting Controller

White/Red Dual LED Lighting Controller Type E (100’ – 500’)

The LC9-E LED Obstruction Light Controller is designed to work with Dialight White/Red Dual LED beacons and obstruction lights. The controller is capable of controlling and monitoring one L-865/L-864 LED beacon and L-810 LED obstruction lights.

For spec sheet click here: LC9-E1.PDF

 Lighting Controller  

White LED Lighting Controller Type D (100’ – 500’)

The LC9-D LED Obstruction Light Controller is designed to work with Dialight White LED beacons and obstruction lights. The controller is capable of controlling and monitoring one L-865 LED beacon.

For Spec sheets click here: LC9-D1.PDF

 

Contact Info

RVA Lighting and Masts
5240 Finch Ave. E. Unit 10
Scarborough ON M1S 5A3

Sales: 905-719-6500
Toll Free: 1-844-292-7878

Office: 416-292-7878
Fax: 416-352-7558

 

Contact
Please use this form to contact us.


Contact